Canon MG7550 issue
Verfasst: So 17 Jan, 2016 21:50
Hello,
I'm running linux RHEL 7.2 with CUPS 1.6 on a laptop provided by my employer.
At home I have a canon PIXMA MG7550.
I installed the driver from the canon website: cnijfilter2-5.00-1-rpm.tar.gz
Installation went fine and I could define the device in CUPS but it wouldn't print.
Through a support forum I was directed to Turboprint.
I installed the test version and I am willing to buy the license if it works.
I configured the MG7550 and I was able to request the ink levels and print a test page.
However after a very short time the monitor shows: "no connection to the turboprint daemon"
Then I restart the daemon: service tpdaemon restart (as root)
Output:
tprintdaemon: no process found
TP-Daemon Version 2.38-1
Debug Level set to 0
TurboPrint daemon restarted
The "no process found" part seems strange????
After restarting I can use TP for a minute or so and then the connection drops again.
Could this be some timeout???
Any hints on how to avoid this?
Contents of turboprint.cfg:
[Turboprint_Config_File]
[turbo6]
Default=0
Name="Canon_PIXMA_MG7500series_(TurboPrint)"
Short="MG7500series-TurboPrint"
Port="uri"
Devicename="/dev/lp0"
Filename="/tmp/turboprint.prn"
Remoteprinter=""
Remoteserver=""
Remoteuser=""
Remotepassword=""
Remoteworkgroup=""
Remoteip=""
Remotesocket=""
Remoteuri="bjnp://192.168.0.20"
Driver="Canon_PIXMA_MG7500series"
Redirectqueue=""
Redirectmonitor=""
Colormode=2
Preview=1
Cartridge=0
Paper=0
Quality=1
Pagesize=3
Borderlessexpand=2
Customsize=5000,7000
Feed=0
Tray=0
Duplex=0,0,0
Copies=1
Dithering=0
Truematch=1
Mirror=0
Usercolor=0
Brightness=0
Contrast=0
Screengamma=180
Inkvolume=0
Shadows=0
Colorsaturation=0
Intensity_KCMY=0,0,0,0
Limit_KCMY=0,0,0,0
Inklimit=0
Bright_KCMY=0,0,0,0
UCR=0
TAC=0
Colorspace=0
CMYKspace=0
Intent=1
Greytone_AB=0,0
RefLight=6500
GS_X_Scale=100
GS_Y_Scale=100
GS_X_Offset=0
GS_Y_Offset=0
GS_Screen_Lpi=0
GS_Buffer=0
PIC_Ignore_Margins=0
PIC_Position=0,0
PIC_Size=7000,0
PIC_Center=1,1
PIC_Aspect=1
A2PS_Defaults=0
A2PS_Landscape=0
A2PS_Borders=1
A2PS_Headers=1
A2PS_Columns=1
Landscape=0
Number_Up=1
Image_X=1
Image_Y=1
Image_Scaling=100
Use_Image_Scaling=0
Image_DPI=300
Use_Image_DPI=0
Text_CPI=10
Text_LPI=6
Pretty_Print=0
Settings=0,0,0,0,0,0,0,0,0,0
Contents of system.cfg:
TP_CUPS=1
TP_UNIT=1
TP_LANGUAGE=en
TP_CHARSET=UTF-8
TP_INSTALLATIONSTATE=0
TPBIN_BROWSER=firefox
TPFILE_PRINTCAP=/etc/printcap
TPPATH_CONFIG=/etc/turboprint
TPPATH_SHARE=/usr/share/turboprint
TPPATH_SPOOL=/var/spool/lpd
TPPATH_BIN=/usr/bin
TPPATH_FILTERS=/usr/lib/turboprint
TPPATH_DOC=/usr/share/turboprint/doc
TPPATH_LOG=/var/log
TPPATH_VAR=/var/spool
TPPATH_TEMP=/tmp
TPPATH_MAN=/usr/share/man
TPPATH_CUPSDRIVER=/usr/share/cups/model
TPPATH_CUPSSETTINGS=/etc/cups/ppd
TPPATH_CUPSLIB=/usr/lib/cups
TPPATH_CUPSLIB64=/usr/lib64/cups
TPOWN_SPOOLDIR=lp
TPMOD_SPOOLDIR=0755
TPOWN_SPOOLFILE=lp
TPMOD_SPOOLFILE=0640
TPDAEMON_START=1
TPDAEMON_USER=lp
TPDAEMON_GROUP=lp
TPDAEMON_PORT=5552
TPDAEMON_SERVER=1
TPUSE_GSZEDO=1
I'm running linux RHEL 7.2 with CUPS 1.6 on a laptop provided by my employer.
At home I have a canon PIXMA MG7550.
I installed the driver from the canon website: cnijfilter2-5.00-1-rpm.tar.gz
Installation went fine and I could define the device in CUPS but it wouldn't print.
Through a support forum I was directed to Turboprint.
I installed the test version and I am willing to buy the license if it works.
I configured the MG7550 and I was able to request the ink levels and print a test page.
However after a very short time the monitor shows: "no connection to the turboprint daemon"
Then I restart the daemon: service tpdaemon restart (as root)
Output:
tprintdaemon: no process found
TP-Daemon Version 2.38-1
Debug Level set to 0
TurboPrint daemon restarted
The "no process found" part seems strange????
After restarting I can use TP for a minute or so and then the connection drops again.
Could this be some timeout???
Any hints on how to avoid this?
Contents of turboprint.cfg:
[Turboprint_Config_File]
[turbo6]
Default=0
Name="Canon_PIXMA_MG7500series_(TurboPrint)"
Short="MG7500series-TurboPrint"
Port="uri"
Devicename="/dev/lp0"
Filename="/tmp/turboprint.prn"
Remoteprinter=""
Remoteserver=""
Remoteuser=""
Remotepassword=""
Remoteworkgroup=""
Remoteip=""
Remotesocket=""
Remoteuri="bjnp://192.168.0.20"
Driver="Canon_PIXMA_MG7500series"
Redirectqueue=""
Redirectmonitor=""
Colormode=2
Preview=1
Cartridge=0
Paper=0
Quality=1
Pagesize=3
Borderlessexpand=2
Customsize=5000,7000
Feed=0
Tray=0
Duplex=0,0,0
Copies=1
Dithering=0
Truematch=1
Mirror=0
Usercolor=0
Brightness=0
Contrast=0
Screengamma=180
Inkvolume=0
Shadows=0
Colorsaturation=0
Intensity_KCMY=0,0,0,0
Limit_KCMY=0,0,0,0
Inklimit=0
Bright_KCMY=0,0,0,0
UCR=0
TAC=0
Colorspace=0
CMYKspace=0
Intent=1
Greytone_AB=0,0
RefLight=6500
GS_X_Scale=100
GS_Y_Scale=100
GS_X_Offset=0
GS_Y_Offset=0
GS_Screen_Lpi=0
GS_Buffer=0
PIC_Ignore_Margins=0
PIC_Position=0,0
PIC_Size=7000,0
PIC_Center=1,1
PIC_Aspect=1
A2PS_Defaults=0
A2PS_Landscape=0
A2PS_Borders=1
A2PS_Headers=1
A2PS_Columns=1
Landscape=0
Number_Up=1
Image_X=1
Image_Y=1
Image_Scaling=100
Use_Image_Scaling=0
Image_DPI=300
Use_Image_DPI=0
Text_CPI=10
Text_LPI=6
Pretty_Print=0
Settings=0,0,0,0,0,0,0,0,0,0
Contents of system.cfg:
TP_CUPS=1
TP_UNIT=1
TP_LANGUAGE=en
TP_CHARSET=UTF-8
TP_INSTALLATIONSTATE=0
TPBIN_BROWSER=firefox
TPFILE_PRINTCAP=/etc/printcap
TPPATH_CONFIG=/etc/turboprint
TPPATH_SHARE=/usr/share/turboprint
TPPATH_SPOOL=/var/spool/lpd
TPPATH_BIN=/usr/bin
TPPATH_FILTERS=/usr/lib/turboprint
TPPATH_DOC=/usr/share/turboprint/doc
TPPATH_LOG=/var/log
TPPATH_VAR=/var/spool
TPPATH_TEMP=/tmp
TPPATH_MAN=/usr/share/man
TPPATH_CUPSDRIVER=/usr/share/cups/model
TPPATH_CUPSSETTINGS=/etc/cups/ppd
TPPATH_CUPSLIB=/usr/lib/cups
TPPATH_CUPSLIB64=/usr/lib64/cups
TPOWN_SPOOLDIR=lp
TPMOD_SPOOLDIR=0755
TPOWN_SPOOLFILE=lp
TPMOD_SPOOLFILE=0640
TPDAEMON_START=1
TPDAEMON_USER=lp
TPDAEMON_GROUP=lp
TPDAEMON_PORT=5552
TPDAEMON_SERVER=1
TPUSE_GSZEDO=1