hi,
ich hatte anfangs auf meinen rechner suse linux 9.3 prof. installiert, womit turboprint einwandfrei lief. nun habe ich mir suse 10.1 gekauft, bei welchen die selbe turboprint-version mit der selben konfiguration einfach nicht drucken will.
an was könnte das liegen?
vielen dank schonmal im voraus,
schnalf
problem beim umstieg von suse linux 9.3 auf 10.1
tut mir leid das ich jetzt erst antworte, ich hatte viel zu tun.....
hier der auszug aus der /var/log/cups/error_log:
hier wusste ich nicht wo ein druckauftrag anfängt und wo endet, also poste ich die ganze datei:
auÃerdem besitze ich die version 1.92-2
danke schonmal,
schnalf
hier der auszug aus der /var/log/cups/error_log:
und der /var/log/turboprint.log (turboprint_cups.log existiert nicht)I [16/Dec/2006:17:36:58 +0100] Listening to 0:631
I [16/Dec/2006:17:36:58 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
I [16/Dec/2006:17:36:58 +0100] Configured for up to 100 clients.
I [16/Dec/2006:17:36:58 +0100] Allowing up to 100 client connections per host.
I [16/Dec/2006:17:36:58 +0100] Full reload is required.
I [16/Dec/2006:17:37:03 +0100] LoadPPDs: Read "/etc/cups/ppds.dat", 4274 PPDs...
I [16/Dec/2006:17:37:16 +0100] LoadPPDs: No new or changed PPDs...
I [16/Dec/2006:17:37:16 +0100] Full reload complete.
I [16/Dec/2006:17:37:16 +0100] Started backend /usr/lib64/cups/backend/lpd (PID 3874) for job 4.
E [16/Dec/2006:17:40:25 +0100] [Job 4] Unable to connect to printer; will retry in 30 seconds...: Connection timed out
E [16/Dec/2006:17:40:50 +0100] print_job: resource name '/printers/tp0' no good!
E [16/Dec/2006:17:44:04 +0100] [Job 4] Unable to connect to printer; will retry in 30 seconds...: Connection timed out
hier wusste ich nicht wo ein druckauftrag anfängt und wo endet, also poste ich die ganze datei:
ich hoffe das hilft weiter....ERROR:
inifile::open: could not open input file:
/usr/share/turboprint/locale/turboprint_en.loc
ERROR:
inifile::open: could not open input file:
locale/turboprint_en.loc
ERROR:
prefs::open: couldn't open locale file
ERROR:
inifile::open: could not open input file:
/usr/share/turboprint/locale/turboprint_en.loc
ERROR:
inifile::open: could not open input file:
locale/turboprint_en.loc
ERROR:
prefs::open: couldn't open locale file
ERROR:
inifile::open: could not open input file:
/usr/share/turboprint/printers/printers.lst
ERROR:
configfile_class::read_printer_list: could not open file
ERROR:
main: could not open configuration file
ERROR:
inifile::open: could not open input file:
/usr/share/turboprint/locale/turboprint_en.loc
ERROR:
inifile::open: could not open input file:
locale/turboprint_en.loc
ERROR:
prefs::open: couldn't open locale file
ERROR:
inifile::open: could not open input file:
/usr/share/turboprint/locale/turboprint_en.loc
ERROR:
inifile::open: could not open input file:
locale/turboprint_en.loc
ERROR:
prefs::open: couldn't open locale file
ERROR:
inifile::open: could not open input file:
/usr/share/turboprint/printers/printers.lst
ERROR:
configfile_class::read_printer_list: could not open file
ERROR:
main: could not open configuration file
ERROR:
inifile::write: could not open output file
ERROR:
memfree: wrong free adr
ERROR:
inifile::open: could not open input file:
/usr/share/turboprint/locale/turboprint_en.loc
ERROR:
inifile::open: could not open input file:
locale/turboprint_en.loc
ERROR:
prefs::open: couldn't open locale file
ERROR:
inifile::open: could not open input file:
/usr/share/turboprint/locale/turboprint_en.loc
ERROR:
inifile::open: could not open input file:
locale/turboprint_en.loc
ERROR:
prefs::open: couldn't open locale file
ERROR:
inifile::open: could not open input file:
/usr/share/turboprint/printers/printers.lst
ERROR:
configfile_class::read_printer_list: could not open file
ERROR:
main: could not open configuration file
ERROR:
memfree: wrong free adr
ERROR:
inifile::open: could not open input file:
/usr/share/turboprint/locale/turboprint_en.loc
ERROR:
inifile::open: could not open input file:
locale/turboprint_en.loc
ERROR:
prefs::open: couldn't open locale file
ERROR:
inifile::open: could not open input file:
/usr/share/turboprint/printers/printers.lst
ERROR:
configfile_class::read_printer_list: could not open file
FATAL ERROR:
mainpage: could not open configuration file
ERROR:
inifile::open: could not open input file:
/usr/share/turboprint/locale/turboprint_en.loc
ERROR:
inifile::open: could not open input file:
locale/turboprint_en.loc
ERROR:
prefs::open: couldn't open locale file
ERROR:
inifile::open: could not open input file:
/usr/share/turboprint/printers/printers.lst
ERROR:
configfile_class::read_printer_list: could not open file
FATAL ERROR:
mainpage: could not open configuration file
FATAL ERROR:
mainpage: could not open prefs class
ERROR:
inifile::open: could not open input file:
/usr/share/turboprint/locale/turboprint_en.loc
ERROR:
inifile::open: could not open input file:
locale/turboprint_en.loc
ERROR:
prefs::open: couldn't open locale file
ERROR:
inifile::open: could not open input file:
/usr/share/turboprint/printers/printers.lst
ERROR:
configfile_class::read_printer_list: could not open file
FATAL ERROR:
mainpage: could not open configuration file
ERROR:
inifile::open: could not open input file:
/usr/share/turboprint/locale/languages.loc
ERROR:
inifile::open: could not open input file:
/usr/share/turboprint/locale/turboprint_de.loc
ERROR:
inifile::open: could not open input file:
/etc/turboprint/turboprint.cfg
configfile_class::open_config_file: could not open file
ERROR:
inifile::open: could not open input file:
/etc/turboprint/turboprint.cfg
configfile_class::open_config_file: could not open file
ERROR:
printcap::create_spooldirs: no configurations available
ERROR:
printcap::insert_tp_printcap: no configurations available
ERROR:
spoolsystem::write_configs: no configurations available
lpr -Ptp0 /tmp/tp16512_1.tmp
Deleted old spool dir: /var/spool/lpd/turbo1
lpr -Ptp0 /tmp/tp4307_0.tmp
Deleted old spool dir: /var/spool/lpd/turbo2
lpr -Ptp0 /tmp/tp4079_0.tmp
auÃerdem besitze ich die version 1.92-2
danke schonmal,
schnalf
Hallo,
"backend lpd started" im CUPS log deutet darauf hin, dass der Drucker ein Netzwerkdrucker ist, "Unable to connect to printer", dass die Netzwerkverbindung nicht klappt - evtl. IP-Adresse nicht richtig oder aufgrund der Netzwerkkonfiguration des Rechners kann der Drucker nicht erreicht werden. Sie könnten einmal versuchen, ob ein
ping <ip-adresse des Druckers>
von Kommandozeile klappt.
Bitte auch einmal die aktuelle TurboPrint-Version 1.95-1 installieren - diese läuft mit Ihrer bestehenden TurboPrint-Lizenz.
"backend lpd started" im CUPS log deutet darauf hin, dass der Drucker ein Netzwerkdrucker ist, "Unable to connect to printer", dass die Netzwerkverbindung nicht klappt - evtl. IP-Adresse nicht richtig oder aufgrund der Netzwerkkonfiguration des Rechners kann der Drucker nicht erreicht werden. Sie könnten einmal versuchen, ob ein
ping <ip-adresse des Druckers>
von Kommandozeile klappt.
Bitte auch einmal die aktuelle TurboPrint-Version 1.95-1 installieren - diese läuft mit Ihrer bestehenden TurboPrint-Lizenz.