Canon PIXMA iP5000 und CD bedrucken
Canon PIXMA iP5000 und CD bedrucken
mit SuSE 10.1 und OpenOffice 2.0 versuche ich CDs zu bedrucken, in den Vorlagen findet sich ein CD-Label als Grundlage. Im Turboprint Online Handbuch finde ich unter 9.3 ebenfalls ein Anleitung. Mein Problem ist, die Label-Schablone kann ich im Druck nicht wie eingegeben mit Durchmesser 11,6 cm drucken sondern es findet sich ein Kreis auf der CD gedruckt mit Durchmesser 7,1 cm.
Wo könnte mein Fehler liegen ?
Wo könnte mein Fehler liegen ?
ds
Hallo,
bitte folgendes überprüfen:
- Seitenformat in OpenOffice auf "A4" eingestellt
- In den Druckeinstellungen von OpenOffice, "Papier"
-> Papierformat "A4"
-> Papierschacht "CD Tray"
-> Skalierung 100%
- Druckeinstellungen Open Office, "Gerät"
-> Media Type "CD Printable"
-> Print Quality "1200dpi"
- Open Office Druckdialog, "Zusätze"
-> Prospektdruck nicht aktiviert
Ist der Ausdruck jetzt skaliert oder abgeschnitten?
Ist die Druckposition auf der CD korrekt oder versetzt - wenn ja, in welche Richtung?
bitte folgendes überprüfen:
- Seitenformat in OpenOffice auf "A4" eingestellt
- In den Druckeinstellungen von OpenOffice, "Papier"
-> Papierformat "A4"
-> Papierschacht "CD Tray"
-> Skalierung 100%
- Druckeinstellungen Open Office, "Gerät"
-> Media Type "CD Printable"
-> Print Quality "1200dpi"
- Open Office Druckdialog, "Zusätze"
-> Prospektdruck nicht aktiviert
Ist der Ausdruck jetzt skaliert oder abgeschnitten?
Ist die Druckposition auf der CD korrekt oder versetzt - wenn ja, in welche Richtung?
nichts passiert...
hallo
ich hab alle Einstellungen nachvollzogen, versuche zu drucken und als Reaktion blinkt der Drucker "gelb", läÃt aber auch manuell kein Druck in CD Tray auslösen. Der Befehl lpc status :printer is on device 'usb' speed -1
queuing is enabled
printing is enabled
1 entries
daemon present
ziehe ich die CD Einschub-Schiene raus, schlieÃe den Schacht und löse den Druck manuell, "schenkt" mir der Drucker ein leeres Blatt.
Was kann da falsch sein ?
ich hab alle Einstellungen nachvollzogen, versuche zu drucken und als Reaktion blinkt der Drucker "gelb", läÃt aber auch manuell kein Druck in CD Tray auslösen. Der Befehl lpc status :printer is on device 'usb' speed -1
queuing is enabled
printing is enabled
1 entries
daemon present
ziehe ich die CD Einschub-Schiene raus, schlieÃe den Schacht und löse den Druck manuell, "schenkt" mir der Drucker ein leeres Blatt.
Was kann da falsch sein ?
ds
Ich bräuchte aus dem TurboPrint-Logfile /var/log/turboprint_cups.log den Eintrag für den Ausdruck-Versuch auf CD - also den Abschnitt zwichen
und
Evtl. nochmals auf CD drucken versuchen, dann ist es einfach der letzte Abschnitt.
Dann kann ich hoffentlich sehen, wo das Problem liegt.
Code: Alles auswählen
New print job ...
Code: Alles auswählen
------------ End of print job ------------
Dann kann ich hoffentlich sehen, wo das Problem liegt.
ich habe jetzt vielleicht den Fehler gemacht und alle turboprint.log Einträge gelöscht. ??
Auf den Versuch, die CD zu bedrucken reagiert der lof-file überhaupt nicht, ich entferne dann die CD und löse manuell am Drucker den Druckbefehl auf Paper aus: Ausdruck leeres Papier, der "1 entry" unter lpc status verschwindet.
Im log-file ist jetzt nur 1 Eintrag nach Ausdruck einer normalen Office-Seite:
lp -d tp0 /tmp/tp12015_1.tmp
Auf den Versuch, die CD zu bedrucken reagiert der lof-file überhaupt nicht, ich entferne dann die CD und löse manuell am Drucker den Druckbefehl auf Paper aus: Ausdruck leeres Papier, der "1 entry" unter lpc status verschwindet.
Im log-file ist jetzt nur 1 Eintrag nach Ausdruck einer normalen Office-Seite:
lp -d tp0 /tmp/tp12015_1.tmp
ds
Ich brauche den Eintrag aus /var/log/turboprint_cups.log. Falls diese Datei nicht mehr existiert, bitte anlegen, z.B.
Funktionieren normale Ausdrucke auf Papier noch?
Code: Alles auswählen
echo > /var/log/turboprint_cups.log
chmod a+rw /var/log/turboprint_cups.log
New print job Fri Oct 13 13:51:05 CEST 2006 (pstoturboprint 1.85)
job-id 49
user dieter
title CD-Canon-Pixma.std
copies 1
options InputSlot=CDTray PageSize=A4 MediaType=CDprintable_4 zedoColorModel=Black Resolution=600x600x1dpi
file
----------- Start of var file -----------
GSPPDFOUND=1
GSCOLORMODE=0
GSXDPI=600
GSYDPI=600
GSWIDTH=4960
GSHEIGHT=7015
TPWIDTH=8268
TPHEIGHT=11693
----------- End of var file -----------
GSCOMMANDLINE=gs -sDEVICE=pbmraw -r600x600 -g4960x7015 -dSAFER -dNOPAUSE -dBATCH
TPCOMMANDLINE=/usr/bin/tpprint -a0 -e1 -s8268x11693 -v2 -l/var/log/turboprint_cups.log ---InputSlot=CDTray ---PageSize=A4 ---MediaType=CDprintable_4 ---zedoColorModel=Black ---Resolution=600x600x1dpi --ppdfile=/etc/cups/ppd/tp0.ppd --psheader=/tmp/pstoturboprint16296.chunk
COMPLETEPIPE=/usr/share/turboprint/lib/tpstdin --paste /tmp/pstoturboprint16296.chunk | gs -sDEVICE=pbmraw -r600x600 -g4960x7015 -dSAFER -dNOPAUSE -dBATCH -sOutputFile=/tmp/pstoturboprint16296.fifo - >> /var/log/turboprint_cups.log
----------- Start of print job -----------
ESP Ghostscript 8.15 (2005-09-22)
Copyright (C) 2004 artofcode LLC, Benicia, CA. All rights reserved.
This software comes with NO WARRANTY: see the file COPYING for details.
------------ End of print job ------------
tpprint 1.91-2 (13-DEC-2004) - TurboPrint printer driver
Copyright (C)ZEDOnet GmbH, Irsee, Germany. All rights reserved.
Filetype=PBM Plusbits_per_pixel=1 bytes_per_line=620 width=4960 height=7015
RGB Mode
Printer=Canon_PIXMA_iP5000; Module=Canon; Id=i865
Colormode=0; Cartridge=0=Color; Quality=1=Medium; Paper=9=CD printable
Pagesize=4=A4; Paper Input=4=CD Tray; Paper Output=0=Front
Duplex=0=Off; Copies=1; Mirror=0; Dithering=0; Flip=0
Page x=4800 y=6780; AppDpi x=600 y=600; DitDpi x=600 y=600;
PrnDpi x=600 y=600; Overlay=0
tpfile::get_patchsample_table: paper=Canon Transparency CF102
table::get_patchsample_struct: default_bright_ink set to default 100
table; linmode=gamma
canon::setup_printer_info: number of channels: 1
canon::setup_printer_info: bits per pixel: 2
canon::setup_printer_info: S600/800 mode
canon::setup_printer_info: i865 photo black used
Canon init string: esc(c 31 c 2
esc(t 80 80 1 esc(l 3a 12
esc(p 2a6 0 1e0 0
Colormatch file=BCI3e6; Curves=2400dpi_ip5000; Table=canon_cf102
Report at end of pdrive_class::begin_page
Total memory usage=651041
Print size in printer pixels, relative to printable area:
left=0 top=0 width=4800 height=6780
Time for <Profile> = 0
Time for <Color> = 0
Time for <Dither> = 20
Time for <Print> = 20
Time for <Total> = 60
Line counters: skip=0; bitmap=6780; others=0; 8bit=0; white=0; b/w=0
pixmap_class::open: can't read magic header
print_page: end of input file
Report at end of pdrivecontrol_class::release_printer
Total memory usage=0
Auch der "normale Ausdruck" von Dokumenten zB Briefen wil nicht mehr: nur noch schemenhaft, z.T. überhaupt nicht mehr...!!
job-id 49
user dieter
title CD-Canon-Pixma.std
copies 1
options InputSlot=CDTray PageSize=A4 MediaType=CDprintable_4 zedoColorModel=Black Resolution=600x600x1dpi
file
----------- Start of var file -----------
GSPPDFOUND=1
GSCOLORMODE=0
GSXDPI=600
GSYDPI=600
GSWIDTH=4960
GSHEIGHT=7015
TPWIDTH=8268
TPHEIGHT=11693
----------- End of var file -----------
GSCOMMANDLINE=gs -sDEVICE=pbmraw -r600x600 -g4960x7015 -dSAFER -dNOPAUSE -dBATCH
TPCOMMANDLINE=/usr/bin/tpprint -a0 -e1 -s8268x11693 -v2 -l/var/log/turboprint_cups.log ---InputSlot=CDTray ---PageSize=A4 ---MediaType=CDprintable_4 ---zedoColorModel=Black ---Resolution=600x600x1dpi --ppdfile=/etc/cups/ppd/tp0.ppd --psheader=/tmp/pstoturboprint16296.chunk
COMPLETEPIPE=/usr/share/turboprint/lib/tpstdin --paste /tmp/pstoturboprint16296.chunk | gs -sDEVICE=pbmraw -r600x600 -g4960x7015 -dSAFER -dNOPAUSE -dBATCH -sOutputFile=/tmp/pstoturboprint16296.fifo - >> /var/log/turboprint_cups.log
----------- Start of print job -----------
ESP Ghostscript 8.15 (2005-09-22)
Copyright (C) 2004 artofcode LLC, Benicia, CA. All rights reserved.
This software comes with NO WARRANTY: see the file COPYING for details.
------------ End of print job ------------
tpprint 1.91-2 (13-DEC-2004) - TurboPrint printer driver
Copyright (C)ZEDOnet GmbH, Irsee, Germany. All rights reserved.
Filetype=PBM Plusbits_per_pixel=1 bytes_per_line=620 width=4960 height=7015
RGB Mode
Printer=Canon_PIXMA_iP5000; Module=Canon; Id=i865
Colormode=0; Cartridge=0=Color; Quality=1=Medium; Paper=9=CD printable
Pagesize=4=A4; Paper Input=4=CD Tray; Paper Output=0=Front
Duplex=0=Off; Copies=1; Mirror=0; Dithering=0; Flip=0
Page x=4800 y=6780; AppDpi x=600 y=600; DitDpi x=600 y=600;
PrnDpi x=600 y=600; Overlay=0
tpfile::get_patchsample_table: paper=Canon Transparency CF102
table::get_patchsample_struct: default_bright_ink set to default 100
table; linmode=gamma
canon::setup_printer_info: number of channels: 1
canon::setup_printer_info: bits per pixel: 2
canon::setup_printer_info: S600/800 mode
canon::setup_printer_info: i865 photo black used
Canon init string: esc(c 31 c 2
esc(t 80 80 1 esc(l 3a 12
esc(p 2a6 0 1e0 0
Colormatch file=BCI3e6; Curves=2400dpi_ip5000; Table=canon_cf102
Report at end of pdrive_class::begin_page
Total memory usage=651041
Print size in printer pixels, relative to printable area:
left=0 top=0 width=4800 height=6780
Time for <Profile> = 0
Time for <Color> = 0
Time for <Dither> = 20
Time for <Print> = 20
Time for <Total> = 60
Line counters: skip=0; bitmap=6780; others=0; 8bit=0; white=0; b/w=0
pixmap_class::open: can't read magic header
print_page: end of input file
Report at end of pdrivecontrol_class::release_printer
Total memory usage=0
Auch der "normale Ausdruck" von Dokumenten zB Briefen wil nicht mehr: nur noch schemenhaft, z.T. überhaupt nicht mehr...!!
ds
Ich habe im Logfile gesehen, daà intern TurboPrint Version 1.91-2 läuft. Evtl. wurde TurboPrint 1.94 installiert und nochmal die 1.91-2 "drüberinstalliert" oder die alter Version war aus irgendeinem Grund schreibgeschützt.
Bitte TurboPrint mit dem "uninstall"-Skript aus dem Installationspaket der aktuellen Version deinstallieren. Dann sollte die Eingabe
tpprint
eine Fehlermeldung "command not found" ergeben. AnschlieÃend nochmal die TurboPrint-Version 1.94-4 installieren.
Bitte TurboPrint mit dem "uninstall"-Skript aus dem Installationspaket der aktuellen Version deinstallieren. Dann sollte die Eingabe
tpprint
eine Fehlermeldung "command not found" ergeben. AnschlieÃend nochmal die TurboPrint-Version 1.94-4 installieren.
Teillösung
Ja, das Update hatte ich überhaupt noch nicht zur Kenntnis genommen
Danach hatte ich nach vielen Versuchen eine Schablone für den iP500 zum bedrucken von CDs erstellt, siehe log-file:
#######################################################
New print job Sun Oct 15 15:27:33 CEST 2006 (pstoturboprint 1.94-2)
job-id 28
user dieter
title CD-Canon-Pixma.std
copies 1
options PageSize=A4 MediaType=CDprintable_4 InputSlot=CDTray zedoColorModel=Black Resolution=600x600dpi_1
file
test directory access:
drwxr-xr-x 2 root root 10712 Oct 14 23:36 /usr/share/turboprint/printers
linux-gate.so.1 => (0xffffe000)
libm.so.6 => /lib/libm.so.6 (0xb7eef000)
libc.so.6 => /lib/libc.so.6 (0xb7dcf000)
/lib/ld-linux.so.2 (0xb7f38000)
/usr/bin/tpprint -v2 -l/var/log/turboprint_cups.log --ppdfile=/etc/cups/ppd/tp0.ppd --psfeatures /tmp/pstoturboprint20973.chunk /tmp/pstoturboprint20973.var
Searching PPD file and postscript header for options...
----------- Start of var file -----------
ZEDOPARM="$ZEDOPARM zedoInputSlot=CDTray"
ZEDOPARM="$ZEDOPARM zedoMediaType=CDprintable_4"
ZEDOPARM="$ZEDOPARM zedoPageRegion=A4"
ZEDOPARM="$ZEDOPARM zedoBrightness=0"
ZEDOPARM="$ZEDOPARM zedoContrast=0"
ZEDOPARM="$ZEDOPARM zedoIntensity=0"
ZEDOPARM="$ZEDOPARM zedoGamut=0"
ZEDOPARM="$ZEDOPARM zedoGamma=180"
ZEDOPARM="$ZEDOPARM zedoColorK=0"
ZEDOPARM="$ZEDOPARM zedoColorC=0"
ZEDOPARM="$ZEDOPARM zedoColorM=0"
ZEDOPARM="$ZEDOPARM zedoColorY=0"
ZEDOPARM="$ZEDOPARM zedoColorCorrection=1"
ZEDOPARM="$ZEDOPARM zedoUserColor=0"
ZEDOPARM="$ZEDOPARM zedoColorModel=Black"
ZEDOPARM="$ZEDOPARM zedoDithering=ErrorDiffusion"
ZEDOPARM="$ZEDOPARM zedoDuplexAdjust=0"
ZEDOPARM="$ZEDOPARM zedoMirror=0"
ZEDOPARM="$ZEDOPARM zedoDuplex=None"
ZEDOPARM="$ZEDOPARM zedoPrinterDriver=Canon_PIXMA_iP5000"
ZEDOPARM="$ZEDOPARM zedoResolution=600x600dpi_1"
ZEDOPARM="$ZEDOPARM zedoPageSize=A4"
ZEDOPARM="$ZEDOPARM zedoMediaType=CDprintable_4"
ZEDOPARM="$ZEDOPARM zedoInputSlot=CDTray"
ZEDOPARM="$ZEDOPARM zedoColorModel=Black"
ZEDOPARM="$ZEDOPARM zedoResolution=600x600dpi_1"
GSPPDFOUND=1
GSCOLORMODE=0
GSXDPI=600
GSYDPI=600
GSWIDTH=4960
GSHEIGHT=7015
TPWIDTH=8268
TPHEIGHT=11693
TPXOFFSET=0
TPYOFFSET=0
----------- End of var file -----------
GSCOMMANDLINE=gs -sDEVICE=pbmraw -r600x600 -g4960x7015 -dSAFER -dNOPAUSE -dBATCH
TPCOMMANDLINE=/usr/bin/tpprint -a0 -e1 -s8268x11693 -v2 -l/var/log/turboprint_cups.log ---PageSize=A4 ---MediaType=CDprintable_4 ---InputSlot=CDTray ---zedoColorModel=Black ---Resolution=600x600dpi_1 --ppdfile=/etc/cups/ppd/tp0.ppd --psheader=/tmp/pstoturboprint20973.chunk
COMPLETEPIPE=/usr/share/turboprint/lib/tpstdin --paste /tmp/pstoturboprint20973.chunk | gs -sDEVICE=pbmraw -r600x600 -g4960x7015 -dSAFER -dNOPAUSE -dBATCH -sOutputFile=/tmp/pstoturboprint20973.fifo - >> /var/log/turboprint_cups.log
----------- Start of print job -----------
ESP Ghostscript 8.15 (2005-09-22)
Copyright (C) 2004 artofcode LLC, Benicia, CA. All rights reserved.
This software comes with NO WARRANTY: see the file COPYING for details.
------------ End of print job ------------
tpprint 1.94-4 (08-JUN-2006) - TurboPrint printer driver
Copyright (C)ZEDOnet GmbH, Irsee, Germany. All rights reserved.
Searching PPD file and postscript header for options...
interpret_ps: no output file specified
Filetype=PBM Plusbits_per_pixel=1 bytes_per_line=620 width=4960 height=7015
RGB Mode
Printer=Canon_PIXMA_iP5000; Module=Canon; Id=i865
ERROR:
tpfile_class::read_mode: item 'Weave' not found
Colormode=0; Cartridge=0=Color; Quality=1=Medium; Paper=9=CD printable
Pagesize=4=A4; Paper Input=4=CD Tray; Paper Output=0=Front
Duplex=0=Off; Copies=1; Mirror=0; Dithering=0; Flip=0
Page x=4800 y=6780; AppDpi x=600 y=600; DitDpi x=600 y=600;
PrnDpi x=600 y=600; Overlay=0
tpfile::get_patchsample_table: paper=Canon Transparency CF102
table::get_patchsample_struct: default_bright_ink set to default 100
table; linmode=gamma
canon::setup_printer_info: number of channels: 1
canon_info.model_level=3
canon::setup_printer_info: bits per pixel: 4
canon::setup_printer_info: S600/800 mode
canon::setup_printer_info: s600 split colors
canon::setup_printer_info: i865 photo black used
Canon init string: esc(c 30 c 2
esc(t 80 80 1 esc(l 3a 12
esc(p 2a6 0 1e0 0
Colormatch file=BCI3e6; Curves=2400dpi_ip5000; Table=canon_cf102
Report at end of pdrive_class::begin_page
Total memory usage=2384978
calculate_dim: print left=0 top=0 width=4800 height=6780
calculate_dim: section left=80 top=70 width=4800 height=6780
Print size in printer pixels, relative to printable area:
left=0 top=0 width=4800 height=6780
Time for <Profile> = 0
Time for <Color> = 0
Time for <Dither> = 0
Time for <Print> = 20
Time for <Total> = 40
Line counters: skip=0; bitmap=6780; others=0; 8bit=0; white=0; b/w=0
pixmap_class::open: can't read magic header
print_page: end of input file
Report at end of pdrivecontrol_class::release_printer
Total memory usage=0
aber nach dem Speichern und erneuten Aufruf zum echten Druck macht er wieder einen verkleinerten Druck auf die CD ( ca. 4,8cm Durchmesser statt 11 bzw 12 cm)
siehe log-file:
#######################################################
New print job Sun Oct 15 18:17:19 CEST 2006 (pstoturboprint 1.94-2)
job-id 2
user dieter
title Unbenannt1
copies 1
options InputSlot=CDTray MediaType=CDprintable_4 PageSize=CDPrintable Resolution=600x600dpi_1
file
test directory access:
drwxr-xr-x 2 root root 10712 Oct 14 23:36 /usr/share/turboprint/printers
linux-gate.so.1 => (0xffffe000)
libm.so.6 => /lib/libm.so.6 (0xb7f63000)
libc.so.6 => /lib/libc.so.6 (0xb7e43000)
/lib/ld-linux.so.2 (0xb7fac000)
/usr/bin/tpprint -v2 -l/var/log/turboprint_cups.log --ppdfile=/etc/cups/ppd/tp1.ppd --psfeatures /tmp/pstoturboprint4339.chunk /tmp/pstoturboprint4339.var
Searching PPD file and postscript header for options...
----------- Start of var file -----------
ZEDOPARM="$ZEDOPARM zedoInputSlot=CDTray"
ZEDOPARM="$ZEDOPARM zedoMediaType=CDprintable_4"
ZEDOPARM="$ZEDOPARM zedoPageRegion=CDPrintable"
ZEDOPARM="$ZEDOPARM zedoBrightness=0"
ZEDOPARM="$ZEDOPARM zedoContrast=0"
ZEDOPARM="$ZEDOPARM zedoIntensity=0"
ZEDOPARM="$ZEDOPARM zedoGamut=0"
ZEDOPARM="$ZEDOPARM zedoGamma=180"
ZEDOPARM="$ZEDOPARM zedoColorK=0"
ZEDOPARM="$ZEDOPARM zedoColorC=0"
ZEDOPARM="$ZEDOPARM zedoColorM=0"
ZEDOPARM="$ZEDOPARM zedoColorY=0"
ZEDOPARM="$ZEDOPARM zedoColorCorrection=1"
ZEDOPARM="$ZEDOPARM zedoUserColor=0"
ZEDOPARM="$ZEDOPARM zedoColorModel=RGB"
ZEDOPARM="$ZEDOPARM zedoDithering=ErrorDiffusion"
ZEDOPARM="$ZEDOPARM zedoDuplexAdjust=0"
ZEDOPARM="$ZEDOPARM zedoMirror=0"
ZEDOPARM="$ZEDOPARM zedoDuplex=None"
ZEDOPARM="$ZEDOPARM zedoPrinterDriver=Canon_PIXMA_iP5000"
ZEDOPARM="$ZEDOPARM zedoResolution=600x600dpi_1"
ZEDOPARM="$ZEDOPARM zedoInputSlot=CDTray"
ZEDOPARM="$ZEDOPARM zedoMediaType=CDprintable_4"
ZEDOPARM="$ZEDOPARM zedoPageSize=CDPrintable"
ZEDOPARM="$ZEDOPARM zedoResolution=600x600dpi_1"
GSPPDFOUND=1
GSCOLORMODE=2
GSXDPI=600
GSYDPI=600
GSWIDTH=3205
GSHEIGHT=6039
TPWIDTH=5342
TPHEIGHT=10066
TPXOFFSET=0
TPYOFFSET=0
----------- End of var file -----------
GSCOMMANDLINE=gs -sDEVICE=pcx24b -r600x600 -g3205x6039 -dSAFER -dNOPAUSE -dBATCH
TPCOMMANDLINE=/usr/bin/tpprint -a0 -e1 -s5342x10066 -v2 -l/var/log/turboprint_cups.log ---InputSlot=CDTray ---MediaType=CDprintable_4 ---PageSize=CDPrintable ---Resolution=600x600dpi_1 --ppdfile=/etc/cups/ppd/tp1.ppd --psheader=/tmp/pstoturboprint4339.chunk
COMPLETEPIPE=/usr/share/turboprint/lib/tpstdin --paste /tmp/pstoturboprint4339.chunk | gs -sDEVICE=pcx24b -r600x600 -g3205x6039 -dSAFER -dNOPAUSE -dBATCH -sOutputFile=/tmp/pstoturboprint4339.fifo - >> /var/log/turboprint_cups.log
----------- Start of print job -----------
ESP Ghostscript 8.15 (2005-09-22)
Copyright (C) 2004 artofcode LLC, Benicia, CA. All rights reserved.
This software comes with NO WARRANTY: see the file COPYING for details.
------------ End of print job ------------
warum dieses ?
und wie kann ich die beiden CD-Kreise, die ich als Schablone im OpenOffice habe, beim Druck verschwinden lassen ?
Danach hatte ich nach vielen Versuchen eine Schablone für den iP500 zum bedrucken von CDs erstellt, siehe log-file:
#######################################################
New print job Sun Oct 15 15:27:33 CEST 2006 (pstoturboprint 1.94-2)
job-id 28
user dieter
title CD-Canon-Pixma.std
copies 1
options PageSize=A4 MediaType=CDprintable_4 InputSlot=CDTray zedoColorModel=Black Resolution=600x600dpi_1
file
test directory access:
drwxr-xr-x 2 root root 10712 Oct 14 23:36 /usr/share/turboprint/printers
linux-gate.so.1 => (0xffffe000)
libm.so.6 => /lib/libm.so.6 (0xb7eef000)
libc.so.6 => /lib/libc.so.6 (0xb7dcf000)
/lib/ld-linux.so.2 (0xb7f38000)
/usr/bin/tpprint -v2 -l/var/log/turboprint_cups.log --ppdfile=/etc/cups/ppd/tp0.ppd --psfeatures /tmp/pstoturboprint20973.chunk /tmp/pstoturboprint20973.var
Searching PPD file and postscript header for options...
----------- Start of var file -----------
ZEDOPARM="$ZEDOPARM zedoInputSlot=CDTray"
ZEDOPARM="$ZEDOPARM zedoMediaType=CDprintable_4"
ZEDOPARM="$ZEDOPARM zedoPageRegion=A4"
ZEDOPARM="$ZEDOPARM zedoBrightness=0"
ZEDOPARM="$ZEDOPARM zedoContrast=0"
ZEDOPARM="$ZEDOPARM zedoIntensity=0"
ZEDOPARM="$ZEDOPARM zedoGamut=0"
ZEDOPARM="$ZEDOPARM zedoGamma=180"
ZEDOPARM="$ZEDOPARM zedoColorK=0"
ZEDOPARM="$ZEDOPARM zedoColorC=0"
ZEDOPARM="$ZEDOPARM zedoColorM=0"
ZEDOPARM="$ZEDOPARM zedoColorY=0"
ZEDOPARM="$ZEDOPARM zedoColorCorrection=1"
ZEDOPARM="$ZEDOPARM zedoUserColor=0"
ZEDOPARM="$ZEDOPARM zedoColorModel=Black"
ZEDOPARM="$ZEDOPARM zedoDithering=ErrorDiffusion"
ZEDOPARM="$ZEDOPARM zedoDuplexAdjust=0"
ZEDOPARM="$ZEDOPARM zedoMirror=0"
ZEDOPARM="$ZEDOPARM zedoDuplex=None"
ZEDOPARM="$ZEDOPARM zedoPrinterDriver=Canon_PIXMA_iP5000"
ZEDOPARM="$ZEDOPARM zedoResolution=600x600dpi_1"
ZEDOPARM="$ZEDOPARM zedoPageSize=A4"
ZEDOPARM="$ZEDOPARM zedoMediaType=CDprintable_4"
ZEDOPARM="$ZEDOPARM zedoInputSlot=CDTray"
ZEDOPARM="$ZEDOPARM zedoColorModel=Black"
ZEDOPARM="$ZEDOPARM zedoResolution=600x600dpi_1"
GSPPDFOUND=1
GSCOLORMODE=0
GSXDPI=600
GSYDPI=600
GSWIDTH=4960
GSHEIGHT=7015
TPWIDTH=8268
TPHEIGHT=11693
TPXOFFSET=0
TPYOFFSET=0
----------- End of var file -----------
GSCOMMANDLINE=gs -sDEVICE=pbmraw -r600x600 -g4960x7015 -dSAFER -dNOPAUSE -dBATCH
TPCOMMANDLINE=/usr/bin/tpprint -a0 -e1 -s8268x11693 -v2 -l/var/log/turboprint_cups.log ---PageSize=A4 ---MediaType=CDprintable_4 ---InputSlot=CDTray ---zedoColorModel=Black ---Resolution=600x600dpi_1 --ppdfile=/etc/cups/ppd/tp0.ppd --psheader=/tmp/pstoturboprint20973.chunk
COMPLETEPIPE=/usr/share/turboprint/lib/tpstdin --paste /tmp/pstoturboprint20973.chunk | gs -sDEVICE=pbmraw -r600x600 -g4960x7015 -dSAFER -dNOPAUSE -dBATCH -sOutputFile=/tmp/pstoturboprint20973.fifo - >> /var/log/turboprint_cups.log
----------- Start of print job -----------
ESP Ghostscript 8.15 (2005-09-22)
Copyright (C) 2004 artofcode LLC, Benicia, CA. All rights reserved.
This software comes with NO WARRANTY: see the file COPYING for details.
------------ End of print job ------------
tpprint 1.94-4 (08-JUN-2006) - TurboPrint printer driver
Copyright (C)ZEDOnet GmbH, Irsee, Germany. All rights reserved.
Searching PPD file and postscript header for options...
interpret_ps: no output file specified
Filetype=PBM Plusbits_per_pixel=1 bytes_per_line=620 width=4960 height=7015
RGB Mode
Printer=Canon_PIXMA_iP5000; Module=Canon; Id=i865
ERROR:
tpfile_class::read_mode: item 'Weave' not found
Colormode=0; Cartridge=0=Color; Quality=1=Medium; Paper=9=CD printable
Pagesize=4=A4; Paper Input=4=CD Tray; Paper Output=0=Front
Duplex=0=Off; Copies=1; Mirror=0; Dithering=0; Flip=0
Page x=4800 y=6780; AppDpi x=600 y=600; DitDpi x=600 y=600;
PrnDpi x=600 y=600; Overlay=0
tpfile::get_patchsample_table: paper=Canon Transparency CF102
table::get_patchsample_struct: default_bright_ink set to default 100
table; linmode=gamma
canon::setup_printer_info: number of channels: 1
canon_info.model_level=3
canon::setup_printer_info: bits per pixel: 4
canon::setup_printer_info: S600/800 mode
canon::setup_printer_info: s600 split colors
canon::setup_printer_info: i865 photo black used
Canon init string: esc(c 30 c 2
esc(t 80 80 1 esc(l 3a 12
esc(p 2a6 0 1e0 0
Colormatch file=BCI3e6; Curves=2400dpi_ip5000; Table=canon_cf102
Report at end of pdrive_class::begin_page
Total memory usage=2384978
calculate_dim: print left=0 top=0 width=4800 height=6780
calculate_dim: section left=80 top=70 width=4800 height=6780
Print size in printer pixels, relative to printable area:
left=0 top=0 width=4800 height=6780
Time for <Profile> = 0
Time for <Color> = 0
Time for <Dither> = 0
Time for <Print> = 20
Time for <Total> = 40
Line counters: skip=0; bitmap=6780; others=0; 8bit=0; white=0; b/w=0
pixmap_class::open: can't read magic header
print_page: end of input file
Report at end of pdrivecontrol_class::release_printer
Total memory usage=0
aber nach dem Speichern und erneuten Aufruf zum echten Druck macht er wieder einen verkleinerten Druck auf die CD ( ca. 4,8cm Durchmesser statt 11 bzw 12 cm)
siehe log-file:
#######################################################
New print job Sun Oct 15 18:17:19 CEST 2006 (pstoturboprint 1.94-2)
job-id 2
user dieter
title Unbenannt1
copies 1
options InputSlot=CDTray MediaType=CDprintable_4 PageSize=CDPrintable Resolution=600x600dpi_1
file
test directory access:
drwxr-xr-x 2 root root 10712 Oct 14 23:36 /usr/share/turboprint/printers
linux-gate.so.1 => (0xffffe000)
libm.so.6 => /lib/libm.so.6 (0xb7f63000)
libc.so.6 => /lib/libc.so.6 (0xb7e43000)
/lib/ld-linux.so.2 (0xb7fac000)
/usr/bin/tpprint -v2 -l/var/log/turboprint_cups.log --ppdfile=/etc/cups/ppd/tp1.ppd --psfeatures /tmp/pstoturboprint4339.chunk /tmp/pstoturboprint4339.var
Searching PPD file and postscript header for options...
----------- Start of var file -----------
ZEDOPARM="$ZEDOPARM zedoInputSlot=CDTray"
ZEDOPARM="$ZEDOPARM zedoMediaType=CDprintable_4"
ZEDOPARM="$ZEDOPARM zedoPageRegion=CDPrintable"
ZEDOPARM="$ZEDOPARM zedoBrightness=0"
ZEDOPARM="$ZEDOPARM zedoContrast=0"
ZEDOPARM="$ZEDOPARM zedoIntensity=0"
ZEDOPARM="$ZEDOPARM zedoGamut=0"
ZEDOPARM="$ZEDOPARM zedoGamma=180"
ZEDOPARM="$ZEDOPARM zedoColorK=0"
ZEDOPARM="$ZEDOPARM zedoColorC=0"
ZEDOPARM="$ZEDOPARM zedoColorM=0"
ZEDOPARM="$ZEDOPARM zedoColorY=0"
ZEDOPARM="$ZEDOPARM zedoColorCorrection=1"
ZEDOPARM="$ZEDOPARM zedoUserColor=0"
ZEDOPARM="$ZEDOPARM zedoColorModel=RGB"
ZEDOPARM="$ZEDOPARM zedoDithering=ErrorDiffusion"
ZEDOPARM="$ZEDOPARM zedoDuplexAdjust=0"
ZEDOPARM="$ZEDOPARM zedoMirror=0"
ZEDOPARM="$ZEDOPARM zedoDuplex=None"
ZEDOPARM="$ZEDOPARM zedoPrinterDriver=Canon_PIXMA_iP5000"
ZEDOPARM="$ZEDOPARM zedoResolution=600x600dpi_1"
ZEDOPARM="$ZEDOPARM zedoInputSlot=CDTray"
ZEDOPARM="$ZEDOPARM zedoMediaType=CDprintable_4"
ZEDOPARM="$ZEDOPARM zedoPageSize=CDPrintable"
ZEDOPARM="$ZEDOPARM zedoResolution=600x600dpi_1"
GSPPDFOUND=1
GSCOLORMODE=2
GSXDPI=600
GSYDPI=600
GSWIDTH=3205
GSHEIGHT=6039
TPWIDTH=5342
TPHEIGHT=10066
TPXOFFSET=0
TPYOFFSET=0
----------- End of var file -----------
GSCOMMANDLINE=gs -sDEVICE=pcx24b -r600x600 -g3205x6039 -dSAFER -dNOPAUSE -dBATCH
TPCOMMANDLINE=/usr/bin/tpprint -a0 -e1 -s5342x10066 -v2 -l/var/log/turboprint_cups.log ---InputSlot=CDTray ---MediaType=CDprintable_4 ---PageSize=CDPrintable ---Resolution=600x600dpi_1 --ppdfile=/etc/cups/ppd/tp1.ppd --psheader=/tmp/pstoturboprint4339.chunk
COMPLETEPIPE=/usr/share/turboprint/lib/tpstdin --paste /tmp/pstoturboprint4339.chunk | gs -sDEVICE=pcx24b -r600x600 -g3205x6039 -dSAFER -dNOPAUSE -dBATCH -sOutputFile=/tmp/pstoturboprint4339.fifo - >> /var/log/turboprint_cups.log
----------- Start of print job -----------
ESP Ghostscript 8.15 (2005-09-22)
Copyright (C) 2004 artofcode LLC, Benicia, CA. All rights reserved.
This software comes with NO WARRANTY: see the file COPYING for details.
------------ End of print job ------------
warum dieses ?
und wie kann ich die beiden CD-Kreise, die ich als Schablone im OpenOffice habe, beim Druck verschwinden lassen ?
ds