Epson XP 3100 PDF Druck

Fragen zur Installation
Antworten
alandhae
Beiträge: 3
Registriert: Di 19 Jul, 2011 06:14

Epson XP 3100 PDF Druck

Beitrag von alandhae »

beim Drucken eines PDF Files aus dem Browser: Das PDF File wird mit einem unbekannten Zeichensatz gedruckt und ist damit unlesbar und unbrauchbar.

Vielen Dank für die Unterstützung und frohe Ostern

Andreas

Auszug aus /var/log/turboprint/print.log:

----------- Start of print job -----------
backchannel_fd=5
tpprint 2.49-1 x64 (28-NOV-2019) - TurboPrint printer driver
Copyright (C)ZEDOnet GmbH, Irsee, Germany. All rights reserved.
10-Apr-2020 11:08
PPD file: /etc/cups/ppd/XP3100series-TurboPrint.ppd
header file: /tmp/pstoturboprint21094.chunk
Searching PPD file and postscript header for options...
ERROR:
set_feature: no value given
page size A4 overwritten by ---media=A4
duplex overwritten by ---Duplex=DuplexNoTumble
interpret_ps: no output file specified
::set_info_paths: setting preview file to /var/spool/turboprint/rz5j/zmf/374.zmf
GPL Ghostscript Zedo3 9.05 (2012-02-08)
Copyright (C) 2010 Artifex Software, Inc. All rights reserved.
This software comes with NO WARRANTY: see the file PUBLIC for details.
Processing pages 1 through 1.
Page 1
Can't find CID font "HelveticaNeueLTW1G-Bd".
Attempting to substitute CID font /Adobe-Identity for /HelveticaNeueLTW1G-Bd, see doc/Use.htm#CIDFontSubstitution.
The substitute CID font "Adobe-Identity" is not provided either. attempting to use fallback CIDFont.See doc/Use.htm#CIDFontSubstitution.
Loading a TT font from %rom%Resource/CIDFSubst/DroidSansFallback.ttf to emulate a CID font Adobe-Identity ... Done.
Can't find CID font "HelveticaNeueLTW1G-Roman".
Attempting to substitute CID font /Adobe-Identity for /HelveticaNeueLTW1G-Roman, see doc/Use.htm#CIDFontSubstitution.
# CountGray=1 CountRGB=234 CountCMYK=0 DocWidth=595 DocHeight=842 AutoRotate=0 DocCopies=1Filetype=PBM Plusbits_per_pixel=32 bytes_per_line=11904 width=2976 height=4209
RGB mode 8bit
printable_width=8028 max_printable_width=15000

command level=21 feature set=5 duplex=2
Printer=Epson_XP3100series; Module=Epson; Id=XP305
printable_width=8028 max_printable_width=15000

Colormode=2; Cartridge=0=Color; Quality=1=Low; Paper=0=Plain paper
Pagesize=3=A4; Paper Input=0=Automatic Feed; Paper Output=0=Front
Duplex=1=On (Portrait); Copies=1; Mirror=0; Dithering=0; Flip=0
Page x=2890 y=4123; AppDpi x=360 y=360; DitDpi x=360 y=360;
PrnDpi x=360 y=360; Overlay=0
Print Direction=Bidirectional (0:1,2,0,0);
tpfile::get_patchsample_table: paper=Plain paper
patches; linmode=density
table::build_gamma_table: i=0 color=4 gamma=100 max=100 saturation=100
gamma 100 max 100 saturation 1000 for channel 0
correction=32767
table::build_gamma_table: i=1 color=5 gamma=100 max=100 saturation=100
gamma 100 max 100 saturation 1000 for channel 1
correction=32539
table::build_gamma_table: i=2 color=6 gamma=100 max=100 saturation=100
gamma 100 max 100 saturation 1000 for channel 2
correction=33434
table::build_gamma_table: i=3 color=7 gamma=100 max=100 saturation=100
gamma 100 max 100 saturation 1000 for channel 3
correction=32557
matchtable->profile_datafile_version = 1
shadow: 0 => adjust 100 min 50/10 max 50; grey: a=0 b=-30; colorspace=APPLE; cmykspace=0; intent=perceptual; M2; daylight = 5000K
matchtable->numchannels=4
multi_profile_switch=200 multi_c2_switch=100 multi_m2_switch=100
ucr_up=255; max_ink=638; ucr_add=0
polyfit mode=0 channels=4 terms=57 patches=528
have_brighter_grey=0
max_dens_val[GREY_BRIGHT]=-32768 min_dens_val[GREY_BRIGHT]=32767 max_dens_val[GREY_BRIGHTER]=-32768 min_dens_val[GREY_BRIGHTER]=32767
bright_cyan_fac=0 bright_magenta_fac=0
black_fac=100 cyan_fac=47 magenta_fac=52 yellow_fac=34
printer white:l=937 a-005 b+000
printer white poly:l=937 a-005 b+000
printer black:l=249 a+007 b+029
printer black poly:l=240 a+009 b+019
printer darkest poly:l=240 a+009 b+019
black l=00 a+00 b+00 => l=240 a+009 b+019: K99 C00 M00 Y00 c00 m00 k00 g00 h00
black94 l=06 a+00 b+00 => l=292 a+017 b+029: K66 C57 M50 Y46 c00 m00 k00 g00 h00
black87 l=17 a+00 b+00 => l=345 a+026 b+043: K40 C72 M62 Y49 c00 m00 k00 g00 h00
black75 l=34 a+00 b+00 => l=458 a+013 b-021: K01 C92 M58 Y37 c00 m00 k00 g00 h00
black62 l=48 a+00 b+00 => l=547 a+000 b-039: K00 C47 M31 Y27 c00 m00 k00 g00 h00
black50 l=60 a+00 b+00 => l=637 a-001 b-040: K00 C30 M20 Y18 c00 m00 k00 g00 h00
black37 l=71 a+00 b+00 => l=718 a-002 b-040: K00 C20 M12 Y11 c00 m00 k00 g00 h00
black25 l=82 a+00 b+00 => l=795 a-003 b-040: K00 C11 M07 Y05 c00 m00 k00 g00 h00
black12 l=91 a+00 b+00 => l=868 a-006 b-029: K00 C05 M02 Y01 c00 m00 k00 g00 h00
white l=99 a+00 b+00 => l=936 a-005 b+000: K00 C00 M00 Y00 c00 m00 k00 g00 h00
cyan l=89 a-54 b-17 => l=778 a-165 b-200: K00 C28 M00 Y00 c00 m00 k00 g00 h00
magenta l=64 a+87 b-52 => l=656 a+465 b-124: K00 C00 M48 Y00 c00 m00 k00 g00 h00
yellow l=97 a-14 b+86 => l=879 a-015 b+604: K00 C00 M00 Y53 c00 m00 k00 g00 h00
red l=58 a+77 b+70 => l=590 a+458 b+365: K00 C00 M99 Y92 c00 m00 k00 g00 h00
green l=86 a-84 b+72 => l=722 a-257 b+372: K00 C26 M00 Y56 c00 m00 k00 g00 h00
blue l=32 a+60 b-105 => l=466 a+084 b-379: K00 C97 M38 Y00 c00 m00 k00 g00 h00
epson::setup_printer_info: number of channels: 4
epson::setup_printer_info: bits per pixel: 2
Epson init string: ESC ( K 2 ESC U 0 ESC ( m 40 ESC ( e 17
epson::setup_printer_info: color nozzles:60 color spacing:180 black nozzles:180 black spacing:180
epson::setup_printer_info: c70 nonstandard head layout
epson_info.top_feed=402 epson_info.top_margin=-719 epson_info.bottom_margin=8333 epson_info.unit_y=720 epson_info.y_pixel_units=2
esc(C 20e3 esc(c fffffd31 208d
Microweave information
nozzlespacing=2 package=2 totalpasses=2 unitpixels=2
numbuffers=5
calculate_weave_parameters_sub(min)

nozzlenum=60 used_nozzles=59 cycle_length=2 feed_sum=2
Sequence 1>1(0),1>0(0),
calculate_weave_parameters_sub(reg)

nozzlenum=60 used_nozzles=59 cycle_length=2 feed_sum=118
Sequence 59>1(0),59>0(0),
feed_total=118 feed_minimum_total=2 feed_buildup_total=0 feed_builddown_total=0
total_passes=2 buildup_steps=4 builddown_steps=4
borderless_interleave num_headbuffers=15
borderless_buildup=0 buildup_steps=4 y_builddown=4403 max_height=4525 builddown_steps=4
y_cover=180 color_max_off=120 unit_pixels=2
esc(m 40
Colormatch file=XP300; Curves=360dpi_xp305; Table=plain_paper
Report at end of pdrive_class::begin_page
Total memory usage=1465662
PREVIEW y_offset=43 org_height=4209 src_scanline=42 preview_scanline=6
calculate_dim: print left=0 top=0 width=2890 height=4123
calculate_dim: section left=43 top=43 width=2890 height=4123
check_add_logo returned 0
Printed section of picture:
left=43 top=43 width=2890 height=4123
Printer: resolution x_dpi=360 y_dpi=360 color_mode=2
Page - printable area in printer pixels:
left=43 top=43 width=2890 height=4123
Print size in printer pixels, relative to printable area:
left=0 top=0 width=2890 height=4123
tpprint::update_ink: black_type=0 rgb_mode=0
tpprint::update_ink: black_type=0 rgb_mode=0
Time for <Profile> = 266
Time for <Color> = 506
Time for <Dither> = 147
Time for <Print> = 27
Time for <Total> = 998
Line counters: skip=0; bitmap=0; others=4123; 8bit=0; white=2089; b/w=0
Color 0 sum: 10
Color 1 sum: 20
Color 2 sum: 19
Color 3 sum: 13
total sum: 62
pixmap_class::open: end of file reached
print_page: end of input file
epson::setup_printer_info: number of channels: 4
epson::setup_printer_info: bits per pixel: 2
Epson init string: ESC ( K 2 ESC U 0 ESC ( m 40 ESC ( e 17
epson::setup_printer_info: color nozzles:60 color spacing:180 black nozzles:180 black spacing:180
epson::setup_printer_info: c70 nonstandard head layout
epson_info.top_feed=402 epson_info.top_margin=-719 epson_info.bottom_margin=8333 epson_info.unit_y=720 epson_info.y_pixel_units=2
esc(C 20e3 esc(c fffffd31 208d
Microweave information
nozzlespacing=2 package=2 totalpasses=2 unitpixels=2
numbuffers=5
calculate_weave_parameters_sub(min)

nozzlenum=60 used_nozzles=59 cycle_length=2 feed_sum=2
Sequence 1>1(0),1>0(0),
calculate_weave_parameters_sub(reg)

nozzlenum=60 used_nozzles=59 cycle_length=2 feed_sum=118
Sequence 59>1(0),59>0(0),
feed_total=118 feed_minimum_total=2 feed_buildup_total=0 feed_builddown_total=0
total_passes=2 buildup_steps=4 builddown_steps=4
borderless_interleave num_headbuffers=15
borderless_buildup=0 buildup_steps=4 y_builddown=4403 max_height=4525 builddown_steps=4
y_cover=180 color_max_off=120 unit_pixels=2
esc(m 40
Report at end of pdrivecontrol_class::release_printer
Total memory usage=0
tpprint: at end of main result=-21
------------ End of print job - result = 0 ------------
job cancelling procedure - TPPID=21121 GSPID=21123 PVPID=
------------ END of tpprint filter ------------
zedonet
Administrator
Beiträge: 1630
Registriert: Fr 29 Sep, 2006 13:10

Re: Epson XP 3100 PDF Druck

Beitrag von zedonet »

Hallo,

die Umwandlung von PDF in die Seitenbitmap für den Drucker wird durch Ghostscript vorgenommen, dort wird vermutlich der Zeichensatz falsch zugeordnet.

Können Sie bitte einmal folgendes ausprobieren:

TurboPrint Control starten, dort im Dialog "Einstellungen" das Häkchen bei der Optin "GPL-Ghostscript mit TurboPrint-Erweiterungen verwenden" entfernen.

Falls das nichts hilft, bitte genauere Informationen senden:

- Ihre Linux-Distribution & Version
- aus welchem Anwendungsprogramm wurde gedruckt (z.B. Okular PDF-Viewer, Version ...)
- eine PDF-Datei, mit der sich das Problem nachvollziehen lässt
alandhae
Beiträge: 3
Registriert: Di 19 Jul, 2011 06:14

Re: Epson XP 3100 PDF Druck

Beitrag von alandhae »

Diese Einstellungen habe ich bereits ausprobiert, ohne Erfolg:
OS: Ubuntu 18.04.4 LTS \n \l
Kernel: Linux linux-home 4.15.0-97-generic #98-Ubuntu SMP Tue Apr 7 10:21:29 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
Drucken über Browser: Google Chrome Version 79.0.3945.130 (Official Build) (64-bit)

Folgender PDF Datei wird gedruckt: https://www1.miele.com/pmedia/ZGA/TX358 ... 640-03.pdf
Ich drucke Seite 39

Mit Zedonet Ghostscript Extensions: gesamter Ausdruck in fehlerhaftem Font, dadurch unlesbar
Ohne Zedonet Ghostscript Extensions: nur die ersten Zeilen des PDF werden gedruckt.
Ich kann keine Dateien hizufügen, erhalte Datei zu groß Meldung, wollte 2 Scanns anhängen: 590kB und 390kB groß
Vielleicht kann es ja ohne die Scanns nachvollzogen werden.

Danke für die Unterstützung,

Ciao

Andreas
zedonet
Administrator
Beiträge: 1630
Registriert: Fr 29 Sep, 2006 13:10

Re: Epson XP 3100 PDF Druck

Beitrag von zedonet »

Vielen Dank für die Informationen. Wir konnten das Problem mit Chrome nachvollziehen, mit dem Ubuntu Dokumentenbetrachter (Evince) und mit Firefox klappt der Druck dagegen korrekt, vielleicht können Sie auf eines dieser Programme ausweichen.

Wir prüfen noch, ob sich das Problem mit Chrome von unserer Seite aus beheben lässt.
alandhae
Beiträge: 3
Registriert: Di 19 Jul, 2011 06:14

Re: Epson XP 3100 PDF Druck

Beitrag von alandhae »

Danke für die Antwort, hatte gar nicht versucht, die Datei auf eine andere Art zu drucken. Ich würde mich freuen, wenn es irgendwie und irgendwann auch eine Lösung für Chrome gibt.
Ciao
Andreas
Antworten